Fibre laser cutting machine parts introduction PART 1

  • Professional CNC controller of Fibre laser cutting machine introduction (PA8000 of Hans laser or BeckHoff from Germany)

1.     Support different images format as Al, DXF, PLT, Gerber, can read standard ISO G codes from MaterCam, Type3 such nesting software.

2.     Automatically optimization when open or lead in DXF file, like delete repeated line, merge connected lines, recognize in/out cutting file and file sorting out.User can decide to manually do above work, or let controller do it automatically.

3.     Support conventional picture edit functions

4.     Following what you see is what you get, to set lead in/out, kerf compensation, merge, bridge, over burning, save gap ….etc

5.     Unique function of Preview of cutting work flow.

6.     Support segmental pierce, Progressive pierce, Pre-pierce, support separately setting laser watt, frequency, laser type, air type, pressure, auto cutting height during pierce and cutting.

7.     Support to set separate lead in/out speed according to adjustment of laser power.

8.     Big storage, allowing user to save all cutting parameters to use it again on same material.

9.     Breakpoint recovery, CNC can return to the point where the cutting stopped, allowing partial file cutting. It can go to any point to start there after stop or pause.

10.  Same software can support round tube cutting and plate cutting, programming is same, and support intersect cutting.

11.  Support to cut at set height, automatically seek edge, and start from outside of workpiece, or lift up when torch is out of workpiece.

12.  Powerful expanding capability, over 15 PLC process programming, over 30 programmable processes.

13.  Input/output and alarm input are programmable, support wireless remote control, and support internet ……


For laser power from 500–1500W, we have PC based cnc controller, very user-friendly, any new user can directly use our Fibre laser cutting machine.

But for fibre laser cutting machine which laser power over 2000W, control precision is the top priority.  PA8000 or Beckhoff such famous brand controller is a must for high speed control, even their parameter settings are a little complicated to user.  

We have rich experience with different controllers in this field, we would recommend right one according to your application.

Fibre laser cutting machine Laser head option

2015 hot sale fibre laser cutting machine

2015 hot sale fibre laser cutting machine laser cutting head

We can choose brand laser head origins from USA, Germany. It depends on customer’s request, or we would suggest according to the laser power you choose.

We also have our own laser head design, very user-friendly for new user to adjust focus distance, and convenient to change protection glass or do maintenance work.

Surely Fibre laser cutting machine laser head is standard supplied with closed-loop control Auto focus system.

Fibre laser cutting machine Servo and Gearbox

Same as most manufacturers, we use Panasonic/Yaskawa servo and Shimpo gearbox, but how to fix it on machine and commission it makes big difference.

It matters to machine’s fast move precision, and long-term work stability.

We also choose other brand servo according to CNC controller’s request. Like Beckhoff controller would work better with its own servo package.

Fibre laser cutting machine Laser Power

China has mature 500W/800W laser power as Raycus (NO.1 BRAND IN CHINA) such brand.

But 500–1000W’s first option is IPG.   

SPI has better price and service after sales than IPG on 1000W level.   Laser power supplier’s fast service after sales is very important in this field.  If you had such experience before, you would 100% agree with that.

Over 2000W, we only choose Trumpf’s disk laser.  with higher price than IPG, but it is mature to cut reflective material like Aluminum, Copper….For a high cost machine, we hope to offer more functions to customer.

Currently no one can do it better than Trumpf laser.

It can hardly see a machine is good or not by a few documents or video demo,  we suggest customer come for a visit before make final decision. 

And you may choose 2 or 3 target factories to visit,  then you can see which is best option for you.

Let the real Fibre laser cutting machine tell the truth!