Project Description

IPG 500, 1000, 1.5kw, 2kw fiber laser cutting machine with Safety Cabinet

IPG 500, 1000, 1.5kw, 2kw fiber laser cutting machine with Safety Cabinet

500W laser power option:  IPG, Raycus, SPI,  Maxphotonics,

Complete machine has TWO years warranty. 3015, 4015, 4020, 6020 table available. Open type single table, or double auto exchangeble table, With or without protective cover,  customize as your request. Round/Square tube cutting available. Machine parts list

1000w Fiber laserIPGGermany
Laser headLaserMechUSA
ChillerTongfeiDesignated by Trumpf
CNC controllerCypcutChina
Gear rackYYCTaiwan
Linear guideTHKJapan
Ratio valveSMCJapan
Pressure valveCKDJapan
Auto focus systemBCS100/HYDChina



Effective size(mm)2500*12503000*15004000*2000
Max process height(mm)90
Effective strokeX axis(mm)255030504050
Y axis(mm)130015502050
Z axis(mm)100
Position accuracyX axis(mm/m)±0.03
Y axis(mm/m)±0.03
Z axis(mm/m)±0.01
RepeatedaccuracyX axis(mm)±0.02
Y axis(mm)±0.02
Z axis(mm)±0.005
Fast positioningSpeedX axis(m/min)72
Y axis(m/min)72
Z axis(m/min)15
Max cutting speed30m/min
Max cutting thickness10mm/CS; 5mm/SS
Power consumption10.2kw/h
Protection levelIP54
Machine weight (Ton)3.584.355.12
Size L*W*H(mm)3420*1785*13464116*2165*13465628*2950*1346


Machine table Features

  1. Gantry dual drive, adopting advanced gear rack transmission structure. Equipped with grinding gear and rack, and through the precision collimator one time metering assembly. The machine will secure long-term high cutting speed, high precision transmission.
  2. The machine table machined by large planomiller, with high temperature annealing twice, and high strength complete welding, customer will have long-term payback.

Professional CNC controller introduction. Cypcut controller and PA8000 available.

  1. Support different images format as Al, DXF, PLT, Gerber, can read standard ISO G codes from MaterCam, Type3 such nesting software.
  2. Automatically optimization when open or lead in DXF file, like delete repeated line, merge connected lines, recognize in/out cutting file and file sorting out.User can decide to manually do above work, or let controller do it automatically.
  3. Support conventional picture edit functions
  4. Following what you see is what you get, to set lead in/out, kerf compensation, merge, bridge, over burning, save gap ….etc
  5. Unique function of Preview of cutting work flow.
  6. Support segmental pierce, Progressive pierce, Pre-pierce, support separately setting laser watt, frequency, laser type, air type, pressure, auto cutting height during pierce and cutting.
  7. Support to set separate lead in/out speed according to adjustment of laser power.
  8. Big storage, allowing user to save all cutting parameters to use it again on same material.
  9. Breakpoint recovery, CNC can return to the point where the cutting stopped, allowing partial file cutting. It can go to any point to start there after stop or pause.
  10. Same software can support round tube cutting and plate cutting, programming is same, and support intersect cutting.
  11. Support to cut at set height, automatically seek edge, and start from outside of workpiece, or lift up when torch is out of workpiece.
  12. Powerful expanding capability, over 15 PLC process programming, over 30 programmable processes.
  13. Input/output and alarm input are programmable, support wireless remote control, and support internet ……

Laser head design Lasermech or Swiss Raytools AG, Surely laser head is standard supplied with closed-loop control Auto focus system. Servo and Gearbox 3 arc/min Shimpo gearbox from Japan.  Brand might be same, but it is different precision level.

Laser Power Option, 500W IPG is always first option, but Raycus is reliable too. Maxphotonics is mature now too, and it has price advantage.