PORTABLE FIBER LASER MARKING MACHINE
Widely used in electronic components, hardware tools, electrical products, consumer goods, sensors, auto parts, 3C electronics, handicrafts, precision equipment, gift jewelry, electrical appliances, bathroom industry, battery industry, IT industry and other fields.
- Small size design with portable split structure
- Low power consumption, long life, high efficiency, maintenance-free, easy to install and carry
- Simple operation, one-button control of the switch
- Suitable for separate processing, easy to use with other automation equipment
- High quality laser beam with fine spot and no consumables
- The software is easy to operate and does not require consumables.
Laser Type：FMPF10W/FMPF20W/FMPF30W
Processing Range：110X110mm(Standard）150×150mm 175×175mm 200X200mm 300×300mm
Marking Line Speed：≤7000m/s
Advantage:
- Low cost, high efficiency, low power consumption
- Processing speed is 2-3 times that of traditional laser marking machine
- Good beam quality, small spot size, narrow marking line width, suitable for fine marking
- No need for thermoelectric cooling and water cooling, the whole machine power is less than 800W, only simple air cooling
- Small size, easy to carry and transport
High electro-optical conversion rate, eliminating manual maintenance
The electro-optical conversion rate is high, maintenance-free, high stability, easy to operate, the device can be used immediately, and the laser adopts a sealing structure and a wind cooling mode, and the maintenance is simple.
More convenient operation
- The marking speed is fast, the marking range is wide, and the marking quality is finer.
- You can typeset on your computer and mark barcodes, QR codes, text graphics, rules and irregular serial numbers.
- Deep engraving, black marking and rotary marking, etc.
Technical Parameter:
| PN | PF10W | PF20W | PF30W |
| Power | 10W | 20W | 30W |
| Wavelength | 1064nm | ||
| Beam quality | <2 | ||
| Working area | 110X110mm(Standard) 150x150mm 175x175mm 200x200mm 300x300mm | ||
| Marking speed | ≤7000mm/s | ||
| Cooling | Air-cooled | ||
| Repeatability | ±0.001mm | ||
| Total consumption | ≤800W | ||
| Indicate light | Red | ||
| Power Requirements | AC220V/50Hz( Customizable) | ||
| Rotary table | Optional | ||
Material type and processing method:
| MATERIAL | MATERIAL | C02 | FIBER | ULTRAVIOLET |
| Metal | Aluminum | ● | ● | |
| Aluminum, anodized | ● | ● | ||
| Chromium | ● | ● | ||
| Precious metal | ● | ● | ||
| Metal foil up to 0.5mm (aluminum, brass, copper, precious metal) | ● | ● | ● | |
| Stainless steel | ● | ● | ||
| Metal, painted | ● | ● | ||
| Brass | ● | ● | ||
| Copper | ● | ● | ||
| Titanium | ● | ● | ||
| Steel | ● | |||
| Plastic | Acrylonitrile butadiene styrene (ABS) | ● | ● | |
| Acrylic / PMMA | ● | ● | ||
| Rubber | ● | |||
| Polyamide (PA) | ● | ● | ||
| Polybutylene terephthalate (PBT) | ● | ● | ||
| Polycarbonate (PC) | ● | ● | ||
| Polyethylene (PE) | ● | ● | ||
| Polyester (PES) | ● | ● | ||
| Polyethylene terephthalate (PET) | ● | ● | ||
| Polyimide (PI) | ● | ● | ||
| Polyoxymethylene (POM) | ● | ● | ||
| Polypropylene (PP) | ● | ● | ||
| Polyphenylene sulfide (PPS) | ● | ● |
Related Photos:
